Pics Official AR15 Picture Thread

[ar15robert]

Just three armalite I put the scope and bipod back on. Colt sporter 2 in og configuration and my 10.5. Got a fourth one coming soon

 

[RobG19]

- Aero Lower
- RRA Upper Receiver, barrel and BCG
- BCM Keymod Handguard
- Rail Scales
- VG6 Gamma Muzzle Brake
- PA 2X GLX
- Magpul Stock
- 3D printed "Not sure if it is compliant but it looks compliant" grip lol

 

[RikersBeard]

Moved some hardware around. I removed the Magpul BUIS from the top rifle to the bottom one.
The top rifle originally had the Romeo/Juliet combo but I replaced that setup with the Primary Arms SLx 1-6x24mm FFP Scope LPVO with an Aero Precision Mount SPR and moved the them to the bottom rifle. I need to get an offset mount for the light but I wanted to remount the light anyway. Tempted to get another Streamlight for the top rifle too. I was thinking of either offset BUIS or 45 degree offset backup red dot for the top rifle.


Essentially, I wanted the top one to be my mid-range rifle that I can still do run and gun fun. Then, I wanted the bottom one to be my home defense/ hits the fan set up.

 

[Yourmomlovesmypew]

Mag locked CA-7 pistol build I'm still waiting on a few things to swap out to finish it up.

 

[Hopi.]

Not mine…

 

[Shaunatello]

20” supremacy, been through many rebuilds and this is what I settled on. Ran it in a few classes and many a range day and it’s been my go-to. Here’s the laundry list of parts.

Radian A-DAC lower
Geissele SSA-E trigger
Geissele H1 buffer/spring
B5 Systems stock (w/stock stop) and pistol grip
FN M16A4 upper
Radian charging handle
LWRC BCG
Primary Arms 5x micro prism on ADM QD mount
Trijicon RMR on Hero Mod mount
Magpul MBUS pro rear sight
DD RIS 3 hand guard
Surefire Socom muzzle brake with warden
Surefire M300 with vampire head and Unity Gascap
100 Concepts light cap and kill flash
3Eir Designate IR laser
Unity Axon dual switch
Lunar Concepts Hot Pocket in M81
Blue Force Gear padded sling
Rattle Can paint job

 

[EBR Works]

My 1970's production Colt SP1 with original optic & mag:

https://imgur.com/kQSTXWm

 

[22plinker]

Colt Defense LE901 Modular Carbine both AR-10 and AR-15 in 1 rifle - Before and after CA neutering

 

[EBR Works]

50 Beowulf. For that vehicle running your neighborhood road block during SHTF or a charging boar/Javelina!

https://imgur.com/6P284zc

 

[command_liner]

Everybody loves a hand-made 1-guage AR, right?

https://flic.kr/p/8baF6f

I started with some steel...

https://flic.kr/p/8k8iyQ

 

[EBR Works]

Everybody loves a hand-made 1-guage AR, rigth?

https://flic.kr/p/8baF6f

Got video actually shooting that? Pretty awesome!

 

[RobG19]

PB&Gray:
- DD RISIII Upper 14.5
- Microbest Chrome BCG
- Radian Raptor Charging Handle
- P&W Surefire Muzzle Brake
- Cloud Defensive Reign 3.0 WML
- 3D printed Rail Scales (painted flat black)
- Arisaka Hand Stop
- Aim Surplus ambi safety
- Parker Mountain Machine extended bolt release
- UTG Accusync Iron Sights (Still deciding if I like them)
- Elftmann Single Stage trigger
- Magpul Extended Magazine release
- Magpul Stock
- Holosun 403R while I decide if I want a Romeo 4T or Eotech on it. Mounted on a Scalarworks knock-off I got for free so not complaining lol.
- Aero Lower
- B5 Fin Grip (thinking of what color to paint it)

Just want an HM3X for the occasional magnified shot.

 

[command_liner]

Got video actually shooting that? Pretty awesome!

No video. You can browse through the whole build album on Flickr.
I have a plan to add a "muleslapper" side-mount percussion cap setup, but today the
only way to fire is with a fuse.

 

[rustyshackleford]

PB&Gray:
- DD RISIII Upper 14.5
- Microbest Chrome BCG
- Radian Raptor Charging Handle
- P&W Surefire Muzzle Brake
- Cloud Defensive Reign 3.0 WML
- 3D printed Rail Scales (painted flat black)
- Arisaka Hand Stop
- Aim Surplus ambi safety
- Parker Mountain Machine extended bolt release
- UTG Accusync Iron Sights (Still deciding if I like them)
- Elftmann Single Stage trigger
- Magpul Extended Magazine release
- Magpul Stock
- Holosun 403R while I decide if I want a Romeo 4T or Eotech on it. Mounted on a Scalarworks knock-off I got for free so not complaining lol.
- Aero Lower
- B5 Fin Grip (thinking of what color to paint it)

Just want an HM3X for the occasional magnified shot.

That’s a crazy riser you’ve got there

 

[RobG19]

That’s a crazy riser you’ve got there

1.93 optic height. I figure for a red dot, the goal is quick transitions so might as well raise my head a bit

 

[rustyshackleford]

1.93 optic height. I figure for a red dot, the goal is quick transitions so might as well raise my head a

Right on man. Good looking featureless you’ve got there. What did you use to lock stock?

 

[RobG19]

Right on man. Good looking featureless you’ve got there. What did you use to lock stock?

Thanks! I 3D printed a stock stop that is just like the Strike Industries one.

 

[rustyshackleford]

My favorite old school

Nice username @angryasian

Are you a descendent of a legendary 92” rooftop Korean?

 

[angryasian]

My old reliable

 

[angryasian]

Nice username @angryasian

Are you a descendent of a legendary 92” rooftop Korean?

Nah, just a nick name I picked up in the service