Question Optic plates

[chente707]

I recently purchased a holoson 509t and cant find a plate that fits for a rm1c , Does anyone have any experience with this or can anyone help me with this ? Thanks in advance

 

[Hawktuah1]

Don’t you just need an RMR to 509t plate?

 

[drinktothat421]

That is the compact footprint found on shields or p365? For eps and mod k cut. What gun are you trying to fit it on?

 

[Hawktuah1]

That is the compact footprint found on shields or p365? For eps and mod k cut. What gun are you trying to fit it on?

Rosy Martin RM1C. The Holosun 509t has a proprietary mount

 

[drinktothat421]

So like the you said. The RM1c says its a rmr foot print then you need rmr to 509t

RMR to Holosun 509T STEEL - C&H Precision

RMR to Holosun 509T The C&H Adapter Plate allows you to mount your Holosun 509T to an RMR footprint optics cut. This plate is not compatible with ZEV Posts.This adapter plate does not include the RDS.

chpws.com

 

[JackRydden224]

You would have to put a RMA plate on the slide and then a RMR plate to 509T plate. Yes, you'd be double plating and it's a stupid setup.

You are better off trading it for an EPS or something with a RMSc foot print if you are looking for an enclosed optic so you are not double plating.

 

[drinktothat421]

You would have to put a RMA plate on the slide and then a RMR plate to 509T plate. Yes, you'd be double plating and it's a stupid setup.

You are better off trading it for an EPS or something with a RMSc foot print if you are looking for an enclosed optic so you are not double plating.

This is why i never wanted a 509t. You lose all the benefits of the cross clamp if you habe to runeven 1 plate.

 

[ikeo1]

The main thing you want to check with Rost Martin about is the screws. Holosuns don't fit flush on RM's

 

[slixx]

You would have to put a RMA plate on the slide and then a RMR plate to 509T plate. Yes, you'd be double plating and it's a stupid setup.

RMA? Is the optic ready slide not already cut for an RMR footprint? If so, he'll just need the included plate that comes with the 509T and everything would bolt right up. Just need to find the right screw to mount the plate on.

 

[JackRydden224]

RMA? Is the optic ready slide not already cut for an RMR footprint? If so, he'll just need the included plate that comes with the 509T and everything would bolt right up. Just need to find the right screw to mount the plate on.

RMR not RMA. I typo'ed

The factory slide is not cut for RMR. You need a RMR plate to mount a RMR on the RM1C.

The 509T and Acro optics are just not meant for the RM1C. Go with a EPS or RMSc footprint optic if you want enclosed.

 

[JackRydden224]

This is why i never wanted a 509t. You lose all the benefits of the cross clamp if you habe to runeven 1 plate.

Only run the 509T on a direct milled slide. Like you said never on a plate.

 

[drinktothat421]

Howver the hlx from primary arms. Has my attention. There plate system seem to give more rigidity to the bolt down standard

Only run the 509T on a direct milled slide. Like you said never on a plate.

 

[slixx]

RMR not RMA. I typo'ed

The factory slide is not cut for RMR. You need a RMR plate to mount a RMR on the RM1C.

The 509T and Acro optics are just not meant for the RM1C. Go with a EPS or RMSc footprint optic if you want enclosed.

yeah double stacking sucks. Even one plate and I hate it but imagine two!

 

[drinktothat421]

Howver the hlx from primary arms. Has my attention. There plate system seem to give more rigidity to the bolt down standard. However coa might be the sturdiest.

Only run the 509T on a direct milled slide. Like you said never on a plate.

 

[drinktothat421]

yeah double stacking sucks. Even one plate and I hate it but imagine two!

The only plates that make sense are the ones the fill gaps like a gasket like shawdow system or the staccato or even sig.

 

[slixx]

Howver the hlx from primary arms. Has my attention. There plate system seem to give more rigidity to the bolt down standard. However coa might be the sturdiest.

Those HTX from PA is pretty interesting, the way the mounting design was done but $700 is pretty steep though.. ouch

 

[drinktothat421]

Those HTX from PA is pretty interesting, the way the mounting design was done but $700 is pretty steep though.. ouch

everyone's says they want made in America. But theb buy holosun. However now vortex has a soild reason to not buy a holosun and at 700 you get get the track record for the trijcons and aimpoints.

 

[chente707]

The main thing you want to check with Rost Martin about is the screws. Holosuns don't fit flush on RM's

Thanks for the helpful reply !!