Is there interest in .300 Savage Salvaged Brass (Will pull bullets if interested)

[mehl5]

Hi everyone,

I have a fairly large batch of home-reloaded .300 Savage ammo that was originally put together for a Remington 700. Since I am in California and have no use for them anymore, I want to see if there is a market here for the salvaged components.

To be absolutely clear: I am not selling or transferring live ammunition.

If there is genuine interest, I plan to buy a kinetic puller and disassemble the rounds myself. I would be offering the components for sale strictly as:

• Once-fired .300 Savage Brass (Uncleaned, but will still have the live primers intact).
• Loose .30-caliber projectiles (Pulled cleanly, undamaged).

Before I spend the time and buy the tool to break these down, is there much of a market for .300 Savage brass among the reloaders here? What would be a fair per-piece price to ask for uncleaned, primed .300 Savage brass in today's market?

Please let me know if there is a feasible market for this or interested (shipped once it's completely disassembled into legal components), please let me know!

Thanks in advance for the advice.

 

[echo1]

Where in Kali, PAX?

 

[mehl5]

I’m in San Marcos, just north of San Diego.
Thanks

 

[jayson_b24]

I’m in San Marcos, just north of San Diego.
Thanks

Hello, neighbor!

 

[mehl5]

Hi Jayson, Murrieta is fairly close. Thanks for the 'hello'. I'm new to shooting as a hobby, just inherited a few small guns and wanting to learn more and get experience. One of the rifles i received is a remington 700 which calibers a 300 savage bullet. My father-in-law was a reloader and the only ammo i have for that rifle is what he reloaded but there is a ton of it and being new to shooting i wasn't sure i wanted to take a chance on the reloads, though they look pristine. That is the genesis of my original post. I already had to "let go" of a ton of other guns of his and probably 50,000 rounds of ammo and didn't get to salvage any of that so not wanting to simply trash the little i have left.

Thanks again for your note.

 

[jayson_b24]

Hi Jayson, Murrieta is fairly close. Thanks for the 'hello'. I'm new to shooting as a hobby, just inherited a few small guns and wanting to learn more and get experience. One of the rifles i received is a remington 700 which calibers a 300 savage bullet. My father-in-law was a reloader and the only ammo i have for that rifle is what he reloaded but there is a ton of it and being new to shooting i wasn't sure i wanted to take a chance on the reloads, though they look pristine. That is the genesis of my original post. I already had to "let go" of a ton of other guns of his and probably 50,000 rounds of ammo and didn't get to salvage any of that so not wanting to simply trash the little i have left.

Thanks again for your note.

Best of luck with all of that! I have (9) loose factory rounds up for sale, but that's all I have for .300 SAV: wish I could help more.

I actually work in San Marcos 3 days a week, off off Mission, so I'm in your area a lot; if you ever need anything, let me know!

 

[echo1]

Fear not, shoot it to get the brass, PAX

 

[mehl5]

Thank E1 - that is good advice. Need to summon up the guts to just go to the range on my own and look like a dummy for a while until i figure things out!

 

[jayson_b24]

Thank E1 - that is good advice. Need to summon up the guts to just go to the range on my own and look like a dummy for a while until i figure things out!

I've been looking for an excuse to go shooting again. Iron Sights isn't far from you... PM if you would like to set something up.

 

[PlinkyDinky]

I’d want them just to have more Shiny Things!

 

[five.five-six]

I could use 50 pieces of .300 savage brass.