I need help! Primer stuck

[blackhawk556]

I was reloading when all of sudden something felt stuck. I couldn’t pull the lever all the way up or down. I was looking for brass stuck somewhere and nothing. Then I figured it was primers and I was right

I moved it until I uncovered a spent primer and figured that was it but then I discovered this other primer underneath. Two primers on top of each other

No matter what I try this primer is jammed in there.

Any suggestions?

 

[blackhawk556]

Update

One minute after posting I push the lever hard and it turned lol


Back to your regularly scheduled program

Thank you

 

[sanddiegoduner]

I don’t own a blue press but I would pull the shell plate off and go from there.

 

[ikeo1]

I don’t own a blue press but I would pull the shell plate off and go from there.

Agree. if that happens you can unscrew the shell plate bolt and use some needle nose pliers to pull it out or tweezers

 

[blackhawk556]

What about that wire on top of it? How does that one come off ?

 

[Batman]

What about that wire on top of it? How does that one come off ?

It literally pulls off. There's a locating hole for the one end, but for the bolt it's wrapped around, it just comes straight up.

 

[H. Bowman]

If it sticks, just pop the anvil out with a pick and hammer it out with a punch.